Implementing Cisco Collaboration Practice Test Questions 2023 - Part 7

1. An engineer must configure a secure SIP trunk with a remote provider, with a specific requirement to use port 5065 for inbound and otubound traffic. Which two items must be configured to complete this configuration? (Choose two.)(Select 2answers)

A) Incoming Port in SIP Information section of the SIP Trunk configuration
B) Incoming Port in Security Information of the SIP Profile configuration
C) Incoming Port in SIP Trunk Security Profile configuration
D) Destination Port in SIP Information section of the SIP Trunk configuration



2. How does an engineer globalize routing for ingress calls coming from the PSTN to internal DNs?

A) At Cisco Unified CM, put the calling number in E.164 format and the called number in PSTN format
B) At the PSTN gateway, put the calling number in PSTN format and the called number in DN format
C) At the PSTN gateway, put the calling number in E.164 format and the called number in localized (DN) format
D)



3. If all patterns below are configured in Cisco Unified Communications Manager which would be used when dialing the pattern â??123â??

A) 12!
B) 1XX (urgent Priority Set)
C) 12X (urgent priority set)
D)



4. Which configuration element of a hunt group allows for changing Calling Party Transformations settings?

A) hunt list
B) route group
C) line group
D) hunt pilot



5. Where on Cisco Unified Communications Manager do you configure the standard local route group for a group of devices?

A) System > Location Info
B) Call Routing > Emergency Location > Emergency Location (ELIN) Groups
C) System > Device Pool
D) Call Routing > Route/Hunt > Local Route Group Names