CA Foundation Business Economics Questions 2023 - Part 32
Fri, 03 Mar 2023
Inspirational journeys
Follow the stories of academics and their research expeditions
Comptia Network + 2023 Questions and answer - Part 2
1. A UTM is deployed on the external edge of the main corporate office. The office connects to the WAN port of the edge router. The edge router at the main office connects to the remote offices using GRE IPSec tunnels. A network administrator notices that a worm that was not detected by the UTM has spread from the remote sites into the corporate network. The UTM currently has traffic rules applied that should block the port used by the worm. Which of the following steps would MOST likely correct this issue?
A) A. Move the UTM onto the LAN side of the network
B) B. Enable TLS inspection on the UTM
C) C. Enable stateful inspection on the UTM
D) D. Configure the UTM to deny encrypted files from being transferred
2. A company has completed construction of a new data-center, and the IT staff is now planning to relocate all server and network equipment from the old site to the new site. Which of the following should the IT staff reference to determine the location of the equipment being moved?
A) A. Rack diagrams
B) B. Network topology
C) C. Standard operating procedures
D) D. Wiring documentation
3. A company has hundreds of nodes on a single subnet and has decided to implement VLANs. Which of the following BEST describes the benefit of this approach?
A) A. It segments broadcast domains in the network infrastructure
B) B. It provides a faster port to all servers
C) C. It provides multiple collision domains on one switchport
D) D. It provides multiple broadcast domains within a single collision domain
4. A technician attempts to replace a switch with a new one of similar model from the same vendor. When the technician moves the fiber and SFP plug, the switch does not completely boot up. Considering that the config files are the same, which of the following is the MOST likely cause of the failure?
A) A. Damaged fiber
B) B. Corrupted operating system
C) C. VLAN mismatch
D) D. Bad port
5. A technician is installing a new wireless badging system on a hospital network. The requirements of the badging system are for it to have its own SSID and low power levels. The badging system has to cover 99.9% of the hospital. Which of the following is the BEST action to take to meet the system requirements?
A) A. Install additional WAPs
B) B. Install external antennas
C) C. Move the WAPs closer to the more populated area
D) D. Change the antenna types
A) A. Move the UTM onto the LAN side of the network
B) B. Enable TLS inspection on the UTM
C) C. Enable stateful inspection on the UTM
D) D. Configure the UTM to deny encrypted files from being transferred
2. A company has completed construction of a new data-center, and the IT staff is now planning to relocate all server and network equipment from the old site to the new site. Which of the following should the IT staff reference to determine the location of the equipment being moved?
A) A. Rack diagrams
B) B. Network topology
C) C. Standard operating procedures
D) D. Wiring documentation
3. A company has hundreds of nodes on a single subnet and has decided to implement VLANs. Which of the following BEST describes the benefit of this approach?
A) A. It segments broadcast domains in the network infrastructure
B) B. It provides a faster port to all servers
C) C. It provides multiple collision domains on one switchport
D) D. It provides multiple broadcast domains within a single collision domain
4. A technician attempts to replace a switch with a new one of similar model from the same vendor. When the technician moves the fiber and SFP plug, the switch does not completely boot up. Considering that the config files are the same, which of the following is the MOST likely cause of the failure?
A) A. Damaged fiber
B) B. Corrupted operating system
C) C. VLAN mismatch
D) D. Bad port
5. A technician is installing a new wireless badging system on a hospital network. The requirements of the badging system are for it to have its own SSID and low power levels. The badging system has to cover 99.9% of the hospital. Which of the following is the BEST action to take to meet the system requirements?
A) A. Install additional WAPs
B) B. Install external antennas
C) C. Move the WAPs closer to the more populated area
D) D. Change the antenna types
1. Right Answer: C
Explanation:
2. Right Answer: A
Explanation:
3. Right Answer: A
Explanation:
4. Right Answer: B
Explanation:
5. Right Answer: A
Explanation:
Explanation:
2. Right Answer: A
Explanation:
3. Right Answer: A
Explanation:
4. Right Answer: B
Explanation:
5. Right Answer: A
Explanation:
Tags:
comptia it exams it certification exams it certifications 2023 comptia exam comptia certification comptia questions comptia a+ comptia exam prep comptia 2023 compti prep materials comptia practice exams questions and answers practice tests test question test comptia a+ comptia a+ 1001 comptioa a+ 1002 comptia casp comptia cloud comptia cysa comptia it fundamentals comptia linux comptia network+ comptia security+ linux essentials0 Comments
Categories
Recent posts
CA Foundation Business Economics Questions 2023 - Part 31
Fri, 03 Mar 2023
CA Foundation Business Economics Questions 2023 - Part 30
Fri, 03 Mar 2023
Leave a comment